01923 510 262 info@soundevo.co.uk
0 item(s)
0 item(s) - $0.00

Single Subwoofer Enclosures

Alpine SWT-12S4 1000W Bass Reflex Sub with Tube Enclosure

Features:

  • Speaker System: Bass Reflex Type
  • 12” (30cm) High-Performance Subwoofer
  • Peak Power: 1000W
  • RMS Power: 300W
  • Overall Dimensions Ø 324 x 660 mm
  • Frequency Response 28-200Hz
  • Speaker Impedance: 4 Ω
  • Sensitivity: 92dB/W (1m)
  • Stitched Alpine Logo
  • Included Installation Brackets and Belts
  • Heavy Duty Subwoofer Grill
  • NB Passive enclosure - requires additional amplifier
Rockford Fosgate Punch Series - P3-1X12 Single P3 12" Loaded Enclosure


The most convenient way to get low frequency bass in your system is to drop-in a Punch Loaded enclosure. We're not talking junk in the trunk, we're talking the same genuine Punch woofers available seperately. Punch Loaded enclosures are constructed with durable 5/8" MDF and tuned by our computer aided design software. P3 Loaded Enclosures feature similar tonal performance as P2 & P1 models, but with higher power handling capacity

JL Audio CP110LG-TW1 - 10" MicroSub Ported Enclosure (300 W, 2 OHM)RMS

This incredible MicroSub subwoofer system delivers the kind of output and extension that is normally possible with only much larger systems. The key to its performance lies in the precise tuning of its 10TW1 subwoofer driver into an efficient slot-ported design.

Extensive interior bracing permits the use of thinner wall material that maximizes the enclosure's internal volume relative to its exterior volume. The port wraps around two walls of the enclosure to produce the necessary low tuning frequency that ensures excellent extension and response smoothness. The flared port entry and exit further enhance sound quality by minimizing air-flow noises through the port.

This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal.

Finish: Black, high-grade automotive carpet with silver "JL AUDIO" embroidery on front baffle. A steel mesh grille is included to protect the subwoofer driver.

Construction: CNC-Cut High-Grade MDF

Recommended amplifier power: 75 - 300W
Nominal Impedance: 2 Ohm

JL Audio CP112LG-TW1-2 - 12" MicroSub Ported Enclosure (300 W, 2 OHM)RMS

This incredible MicroSub subwoofer system delivers the kind of output and extension that is normally possible with only much larger systems. The key to its performance lies in the precise tuning of its 12TW1 subwoofer driver into an efficient slot-ported design.

Extensive interior bracing permits the use of thinner wall material that maximizes the enclosure's internal volume relative to its exterior volume. The port wraps around two walls of the enclosure to produce the necessary low tuning frequency that ensures excellent extension and response smoothness. The flared port entry and exit further enhance sound quality by minimizing air-flow noises through the port.

This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal.

Finish: Black, high-grade automotive carpet with silver "JL AUDIO" embroidery on front baffle. A steel mesh grille is included to protect the subwoofer driver.

Construction: CNC-Cut High-Grade MDF

Recommended amplifier power: 75 - 300W
Nominal Impedance: 2 Ohm

JL Audio CS113TG-TW5v2 - Enclosed 13" Subwoofer PowerWedge™ 600W RMS

Enclosed Subwoofer System with Single 13TW5v2-2 Subwoofer Driver, Black Carpet (600 W, 2 O) - Sealed Enclosure


The 13TW5v2 low-profile subwoofer driver has received awards from around the world for its breakthrough performance capabilities in impossibly tight spaces. In this sealed Truck PowerWedge� subwoofer system, we harness the performance of this patented subwoofer driver to deliver amazing sub-bass performance from an enclosure that is only 7.25 in. (184 mm) deep at its base and 4.5 in. (114 mm) at the top.

This enclosure design has been carefully engineered to the optimum sealed enclosure alignment for the 13TW5v2 and has been fine-tuned through extensive real-world listening.

This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal.

Finish: Black, high-grade automotive carpet with "JL AUDIO" embroidered in silver on the front baffle. A steel mesh grille is included to protect the subwoofer driver.

Construction: CNC-Cut High-Grade MDF

Recommended amplifier power: 
250 - 600W

Opening Time

 
  • Monday - Thursday - 9.00AM to 6.00PM
  • Friday - 9.00AM to 5.00PM
  • Saturday - 9.00AM to 4.00PM
  • Sunday -Closed

Contact Us

 

Details

  • Address: Unit 3 Bermer Place, Imperial Way
  • City : Watford
  • Zip Code : WD24 4XX
  • Email:info@soundevo.co.uk
  • Contact No:01923510262
  • Click here to contact us

Customer Services

 

Why Choose Us