01923 510 262 info@soundevo.co.uk
0 item(s)
0 item(s) - $0.00

12" Boxed Subwoofers

ALPINE SBG-1244BR 12" SUBWOOFER IN BASS REFLEX ENCLOSURE

SBG-1244BR - Ready to use Bass Reflex Subwoofer (4Ohm) With 800W peak power handling
Code:SBG-1244BR

JBL CS1214T - 12" 1000Watt Passive Bass tube
  • Passive 12" 1000Watt subwoofer in a custom ported JBL tube
  • Specifications
  • Subwoofer Type : CS1214
  • Type : ported (rear of tube)
  • Power Handling, RMS : 250W
  • Power Handling, Peak : 1000W
  • Sensitivity (2.83V/1m) : 90dB
  • Impedence: 4-ohm
  • Frequency Response : 35Hz - 200Hz
  • Dimensions: Diameter:33cm , Length=66cm
  • 12 Inch Ported Subwoofer Tube for the car
  • Polypropylene woofer cone-for high power handling
  • Rubber Surround-for high cone edge suspension and long durability
  • Progressive Spider-offers better control at excursion limits than linear spiders
  • Custom-tuned ported system acoustically optimized for the in-car environment.
  • Fully designed and engineered in the USA.
JBL CSX-1400BP - 12" Band Pass Subwoofer Box with Acrylic Window

A subwoofer designed to be seen and heard

Some car audio fans love the clarity of sealed subwoofer enclosures. Others crave the added power of vented enclosures.

The CSX-1400BP bandpass subwoofer offers both. It delivers accurate bass response and thundering power—as well as a bold look. The stylish box features a look-in acrylic window shaped like the JBL exclamation point, making the CSX-1400BP as appealing to the eyes as it is to the ears. And the sturdy enclosure shields the 12-inch polypropylene woofer from items that might shift in your trunk. The great value CSX-1400BP proves you don’t have to spend a fortune to enjoy legendary JBL bass.

Hertz Hertz EBX 300.5 - 12" 1000w Sub + Enclosure

EBX 300.5 - 12" 1000w Sub + Enclosure

Designed to provide bursting dynamics and to minimise size requirements, EBX products result from long studies about car compartment acoustics. These boxes have an inclination wall; they are made of very thick MDF, in order for them to be inert and stable. Xponential Flanged Duct is a proprietary raccord style vent, reducing air turbulences to a minimum. The terminals were designed with special attention paid to ergonomics and efficiency. They are flush mounted into a milled recess in the enclosure itself, improving the integrity of the installation. Thanks to their unique pressure contact design, a low resistance transfer of power is ensured, without damaging the exposed wire strands. Two ergonomic handles, covered in anti-slip rubber, aid in the removal of the enclosure from the vehicle and the ease of its transportation.

Rockford Fosgate R2S-1X12 - 12" Prime R2S Shallow Loaded 500W Enclosure

When you have no space for bass, our PRIME R2S 12" shallow loaded enclosure is sure to be a perfect fit for your ride and your budget. These shallow loaded enclosures can fit in tight spaces due to the slim-line depth of 3.25" on the top and 5.25" on the bottom. The wedge design is optimized for single-cab trucks with limited seat travel. Are you ready to rock out? Yeah, we thought so.

Rockford Fosgate Prime R1-1X12 - Single R1 12” 400 Watt Loaded Enclosure
  • Woofer Size: 12"
  • Woofer Series: Prime (R1S4-12)
  • Nominal Impedance (ea): 4-Ohm Internally wired to create a 4-Ohm amplifier load
  • Power Handling: 200 Watts RMS / 400 Watts Max 
  • System Configuration: Sealed
  • Enclosure Material: 5/8" MDF (Medium Density Fiberboard)
  • Speaker Connector: 24.6 Lbs. (11.1 Kg.)
  • Dimensions: H 14.37" x W 17.72" x D 12.51" 
    36.5cm x 45cm x 31.8cm
JL Audio ACS112LG-TW1 - 12" TW1 Active PowerWedge Sealed Subwoofer

In PowerWedge+ systems, the power is built right into the subwoofer system. Housing a proprietary Class D amplifier, this subwoofer system employs our exclusive DCD amplifier technology to extract maximum output from its specially engineered, ultra low-impedance TW1 driver. By combining direct power conversion with an ultra-high current output section, DCD amplifiers are free of conventional switching power supplies, enabling them to generate remarkable power with unprecedented efficiency.

Harnessing the performance and insanely small box requirements of the TW1 subwoofer driver, this subwoofer system is designed to deliver amazing sub-bass from an enclosure that is only 6.625 inches (168 mm) deep. Its low-profile enclosure design has been carefully engineered to the optimum sealed enclosure alignment for the 10TW1 driver and has been fine-tuned through extensive real-world listening.

Integration to OEM and aftermarket head units is a snap thanks to a variety of input options and automatic turn-on capability (via signal sensing or DC offset sensing). Also included is a variable frequency low-pass filter (50-200 Hz), along with output polarity control switch. Adding an optional RBC-1 remote level control (sold separately) lets you control subwoofer levels directly from the driver's seat. A quick-disconnect power connector makes it easy to remove the subwoofer when you need the extra space.

Finish: Black, high-grade automotive carpet with silver "JL AUDIO Built In USA" embroidery on front baffle. A steel mesh grille is included to protect the subwoofer driver.

Construction: CNC-Cut High-Grade MDF

Amplifier power: Built-in DCD Class D amplifier (400 W @ 0.25 Ohm)
Nominal Impedance: 0.25 Ohm

Opening Time

 
  • Monday - Thursday - 9.00AM to 6.00PM
  • Friday - 9.00AM to 5.00PM
  • Saturday - 9.00AM to 4.00PM
  • Sunday -Closed

Contact Us

 

Details

  • Address: Unit 3 Bermer Place, Imperial Way
  • City : Watford
  • Zip Code : WD24 4XX
  • Email:info@soundevo.co.uk
  • Contact No:01923510262
  • Click here to contact us

Customer Services

 

Why Choose Us