01923 510 262 info@soundevo.co.uk
0 item(s)
0 item(s) - $0.00

10" Boxed Subwoofers

Rockford Fosgate Prime R1L-1X10 10" 150W RMS Enclosed Subwoofer

Need Rockford Fosgate bass in a hurry? Drop this single 10" Prime Loaded enclosure in your ride and let the tunes bump! Featuring high current binding posts, 5/8" MDF construction and finished with high density carpet, these loaded enclosures will produce enough bass to make your friends say "Boom Yeah - Rockford Fosgate!"

Rockford Fosgate Prime R2S-1X10 10" 200W RMS Shallow Enclosed Subwoofer

The Prime R1-1X10 is a single 10” sealed enclosure that provides great low bass response at an incredible value. The enclosure is constructed with durable MDF (Medium Density Fiberboard) and covered in resilient high-density carpet. The subwoofer features a Rockford Fosgate’s signature Anodized aluminum voice coil former to deliver superior power handling over the competition.

Rockford Fosgate Punch P3S-1X10 10" 300W RMS Shallow Enclosed Subwoofer

Nothing fits behind your truck seat? Rockford Fosgate has the solution to your problem with the Punch P3S-1X10 shallow 10” loaded enclosure. This loaded enclosure may look small, but it plays loud, and thanks to its 300 Watt RMS power handing and 1-Ohm load wired impedance, you can actually use an amplifier with some balls. Features a sealed slim-line wedge design for optimum mechanical power handling, durable carpet with stitched Diamond-R logo and quick-release input terminals.

Rockford Fosgate Punch P3L-S10 10" 300W RMS Shallow Enclosed Subwoofer

Have a regular cab truck with no space behind the seat? We have the perfect enclosure that delivers respectable Bass where there previously was none. This pre-loaded enclosure features a single Punch Stage-3 10" shallow mount woofer and features a 4-Ohm impedance so it's sure to be compatible with several amplifiers.

Rockford Fosgate Punch P3-1X10 10" 500W RMS Enclosed Subwoofer

The most convenient way to get low frequency bass in your system is to drop-in a Punch Loaded enclosure. We're not talking junk in the trunk, we're talking the same genuine Punch woofers available seperately. Punch Loaded enclosures are constructed with durable 5/8" MDF and tuned by our computer aided design software. P3 Loaded Enclosures feature similar tonal performance as P2 & P1 models, but with higher power handling capacity.

Hertz Hertz DBX 25.3 - 600w Sub

Hertz DBX 25.3 - 600w Sub Box - Technical Specifications

 

  • Very high efficiency subwoofer system with superior power handling.
  • Very thick MDF cabinet construction, strong and inert.
  • Angled rear wall, increases damping of resonances and provides easy fitment in any application.
  • High current plated terminals.
  • Polypropylene membrane stiffened with mineral powders.
  • High excursion butyl rubber surround.
  • Deep ribbing on the surface of the cone increase rigidity.
Rockford Fosgate Prime R1-1X10 - Single R1 10” 200 Watt Loaded Enclosure

The R1-1X10 is a loaded enclosure containing a single 10” subwoofer constructed with durable MDF, high-density carpet, and features quick release terminals to promptly remove or replace the enclosure in your ride.

  • Constructed with 5/8" MDF
  • Covered with high density carpet
  • High current binding posts
JL Audio CP110LG-TW1 - 10" MicroSub Ported Enclosure (300 W, 2 OHM)RMS

This incredible MicroSub subwoofer system delivers the kind of output and extension that is normally possible with only much larger systems. The key to its performance lies in the precise tuning of its 10TW1 subwoofer driver into an efficient slot-ported design.

Extensive interior bracing permits the use of thinner wall material that maximizes the enclosure's internal volume relative to its exterior volume. The port wraps around two walls of the enclosure to produce the necessary low tuning frequency that ensures excellent extension and response smoothness. The flared port entry and exit further enhance sound quality by minimizing air-flow noises through the port.

This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal.

Finish: Black, high-grade automotive carpet with silver "JL AUDIO" embroidery on front baffle. A steel mesh grille is included to protect the subwoofer driver.

Construction: CNC-Cut High-Grade MDF

Recommended amplifier power: 75 - 300W
Nominal Impedance: 2 Ohm

JL Audio HO110-W6V3 – 10W6V3 High Output Enclosure

JL Audio's patented High Output Enclosures are designed to deliver the ultimate high-performance bass experience with a rare combination of superb sound quality and awesome output. In the HO110-W6v3, the high power handling of the 10W6v3 subwoofer driver, combined with its small enclosure requirements, results in a very compact subwoofer system that is capable of impressive output with moderate amplification

Opening Time

 
  • Monday - Thursday - 9.00AM to 6.00PM
  • Friday - 9.00AM to 5.00PM
  • Saturday - 9.00AM to 4.00PM
  • Sunday -Closed

Contact Us

 

Details

  • Address: Unit 3 Bermer Place, Imperial Way
  • City : Watford
  • Zip Code : WD24 4XX
  • Email:info@soundevo.co.uk
  • Contact No:01923510262
  • Click here to contact us

Customer Services

 

Why Choose Us