01923 510 262 info@soundevo.co.uk
0 item(s)
0 item(s) - $0.00
5/6 Channel Amps

5/6 Channel Amps

Alpine PDR-V75 5 Channel Power Density Reference Amplifier

The PDR-Power amplifiers offer the best performance in their class, redefining expectations in the high-power compact amplifier category. Thanks to trickle-down technology, our in-house engineering team has taken many of the patent-pending technologies introduced in the industry-leading PDX series and infused them in the new PDR-Power amplifiers. The PDR-Power amps provide you with the absolute widest bandwidth, best signal-to-noise, lowest distortion and highest damping factor of any amplifier in their class without sacrificing power.

Rockford Fosgate Prime R600X5 - 5 Channel Amplifier 600 Watts

The PRIME R600X5 is a 5-channel amplifier designed to run an entire car audio system! The R600X5 produces up to 75 Watts into each of its four channels with a dedicated subwoofer channel capable of producing 300 Watts into 2-Ohms.

  • Remote Punch Level Control - Sub Channel
  • RCA and High level Input with 2/4/5 Channel Select
  • 12dB/octave Butterworth crossover
  • On Board Punch EQ Control
  • Separate Front, Rear and Sub Gain Control
  • Real time output and power supply thermal sensing
  • Cast aluminum heatsink
  • 4 Gauge power/ground connectors
  • MOSFET power supply
  • Over current protection
  • Short circuit protection
  • Muted turn on
JL Audio RD900/5 - Class D 5-channel Car Amplifier

JL Audio revealed the new RD range of amplifiers at this years CES show in Las Vegas. The main aim of the project was to increase value through innovative use of circuit, industrial and mechanical design.

Circuit design for the RD project was led by JL Audio's Senior Amplifier Engineer, Bruce Macmillan, and is based on JL Audio's highly successful NexD Class D technology, which delivers outstanding sound quality, efficiency and reliability.

RD amplifiers also offer a very sophisticated input section, featuring JL Audio's dual-range differential-balanced technology, for superior noise rejection and excellent compatibility with a wide range of input signal voltages. Automatic turn-on is also built-in, selectable between Signal Sensing and DC Offset Sensing modes. Convenient bridging switches are also provided for each stereo channel bank, eliminating the need for y-adaptors when bridging these channels.

Also on board, for the first time on a JL Audio amplifier, are LED clipping indicators. With the use of a CD or an audio file with a full-scale sine wave, installers can use these LED indicators to quickly establish the correct input sensitivity setting, without the need for additional test equipment. 

All amplifier controls are accessible beneath a removable control cover, resulting in a clean look and security from unauthorized adjustment of the controls. Connections for speaker and power wires are via captured-wire connectors, with all screws protected by the control cover.

JL Audio XD800/8v2 8-channel Car Amplifier 75W RMS x 8

The XD800/8v2 is the industry's first Class D amplifier to offer eight channels of full-range output capability and is capable of delivering a staggering 100 watts to each of its eight channels @ 2 ohms (14.4V, 1% THD). The breakthrough that makes this much power possible in such a small chassis is our NexD ultra-high-speed switching design, which allows for full bandwidth Class D operation with extremely low distortion and outstanding efficiency.

The XD800/8v2 includes a 12 dB / octave filter for each channel bank, which can be configured as a low-pass or high-pass filter, and offers continuously variable cutoff frequency selection from 50-500 Hz.

The XD800/8v2 also features the v2 Spec feature set, which consists of automatic turn-on capability (via signal sensing or DC-offset sensing), and a dual-range differential-balanced input section able to handle a wide range of input voltage levels. With the addition of an HD-RLC remote level control (sold separately), you have the ability to control the level of two, four, or all eight of the amplifier's channel levels from the driver's seat.

Here are a few examples of how the XD800/8v2 can be used:

Eight-channel Satellite Amp: drive four pairs of speakers with 75 W x 8
Big Four-Channel Satellite Amp: bridge to produce 200W x 4 @ 4O
Six-Channel System Amp: drive front and rear satellites with 75 W x 4 @ 4O, plus two 4O subwoofers with 200 W each
Staggered Six-Channel Satellite Amp: drive front speakers with 200 W x 2 @ 4O, plus four 4O speakers with 75 W each
Staggered Five-Channel Satellite Amp: drive three front speakers with 200 W @ 4O + rear speakers with 75 W x 2
Four-Channel System Amp: drive left and right speakers with 200W x 2 @ 4O, plus two 4O subwoofers with 200W each

This amplifier features a black powder-coat finish and a gasketed, brushed aluminum cover for the controls

Phoenix Gold Z Series Z600.5 2400 Watt 5 Channel Amplifier

Intergrated cooling fan regulates amplifier temperature for sustained performance

OEM connection ready compatible with aftermarket or original source units

High level auto turn on powers on the amplifier when an audio signal is supplied

4 way protection circuit : Thermal / Reversed power / Polarity / Low voltage / Short circuit

Heavy duty connector block provides maximum current supply

Opening Time

  • Monday - Thursday - 9.00AM to 6.00PM
  • Friday - 9.00AM to 5.00PM
  • Saturday - 9.00AM to 4.00PM
  • Sunday -Closed

Contact Us



  • Address: Unit 3 Bermer Place, Imperial Way
  • City : Watford
  • Zip Code : WD24 4XX
  • Email:info@soundevo.co.uk
  • Contact No:01923510262
  • Click here to contact us

Customer Services


Why Choose Us